Burner M50

Burner M50
Product No: 97514
Size 762mm 161mm BTU/h(max) 50,000 kCal/h(max)12,600 kW(max)14.65

Economical to use, versatile in application and simple to operate, Mannings gas burners provide infra-red preheating for circumferential seams on large vessels which would be mounted adjacent to a rotating workpiece during automatic welding operations. They can also be used singly, either vertical or horizontal, or in multiples of up to four burners when connected in series. The main gas supply is fed into a single snap-on self-sealing connector on the rear face of a remote control unit. The set point working pressure switch within the unit shuts down the gas supply if the pressure rises to an unacceptable level. A flame failure kit is fitted to the burner as standard.Inlet and outlet pressure gauges are mounted on the front panel of the remote control unit together with the temperature controllers for each of the channels. High pressure gas warning lamps, pilot regulator indicator lamps and a reset push button are all conveniently located on the front panel of the unit.

Other features of the design specification are:Workpiece surface temperatures up to 200oC can be achieved.Natural, butane or propane gas (LPG) can be used. 5 p.s.i. (0.35kg./cm2) minimum required. Even distribution of heat with no local 'hot spots.'All connections are self-sealing and of quick release design.Steel construction gives excellent long life characteristics with vitreous enamel finish.A manual system utilising a 4-way manifold (Ref. 93300) is also available.

Adequate stiocks of spare burner plaques/gaskets/mesh faces and retaining clips are available and supplied on request.